Wireless Controller / Thermostat - Rinnai R2339 Operation Manual

REMOTE / THERMOSTATIC CONTROLLED OPERATION

WIRELESS CONTROLLER / THERMOSTAT

The wireless controller is designed to be wall mounted on a bracket, (bracket supplied with the controller), within
20m of the heater.
The controller houses the thermostat which senses room temperature and communicates back to the Sapphire via
Radio Frequency.
The ideal position for the controller is:
• Away from possible drafts in the room.
• Away from direct sunlight.
• Suitable distance away from the heater
(not exceeding 20 metres).
• Ideally 1.5 m from the floor
(approximately at chest height).
Additional information about Remote Thermostat Control Buttons
Transmit Indicator
Battery Indicator
Temperature Display
Room Indicator or Set Indicator
PWR + OK
UP UP
OK
A/M A/M T T
DOWN DOWN
T (Time)
UP UP
OK OK
A/M A/M T
DOWN DOWN
UP, DOWN & OK
UP
OK
A/M A/M T T
DOWN
P (Program)
UP UP
OK OK
A/M A/M T T
DOWN DOWN
Rinnai Australia
Indicates the thermostat is transmitting to the receiver, the symbol
with appear on the LCD for 1 second.
This symbol will flash when batteries need replacing. The thermostat
will remain functional for approximately 5 days before shutting 'off'.
Re-programming of the controller will be required after battery
replacement.
Displays current temperature. °C is the default but °F is available.
The temperature range is 7°C - 32°C (45°F - 90°F).
When the thermostat is 'ON' the programmed (set) temperature and
the room temperature will be displayed. When the Flame mode is
'ON' the Flame setting F7 to F1 will be displayed.
Switches the thermostat 'ON' and 'OFF'. If thermostat is 'OFF',
pressing and releasing the 'PWR' + 'OK' button will turn the
P P PWR
thermostat on to the most recently selected working mode.
Initiates the time and day of week programming, press and hold for
2 seconds.
P P PWR PWR
'UP' increase hours, minutes, day or temperature 'OK', accepts the
current function and advances to the next function, 'DOWN',
P P PWR PWR
decrease hours, minutes, day or temperature.
Initiates the programming mode, press and hold for 2 seconds.
P PWR PWR
Controller Specifications
Battery:
2 x AA batteries.
Battery Life:
Approximately 12 months.
Dimensions:
Height: 140 mm, Width: 80 mm, Depth: 20 mm.
5 Sapphire Controller Operation Manual