Deger Energie DEGERtraker 3000NT Assembly Instruction Manual page 14

Assembly instruction
DEGERtraker
Part III – Structure
Assembly base frame
Only required for the DEGERtrakers 9000NT supporting frames:
The tension rods supplied must be installed before assembling the DEGERtrakers 9000NT base frame onto
the rotating head. To do this, push the tension rods through the longitudinal holes of the upper and lower
cross member and secure each with an Washer M12, an M12 nut and an M12 self-locking nut.
torque 15Nm
Detailed view from above:
(sectional view)
Lock nut M12
Nut M12
Washer M12
Tension rod with M12 thread on both sides
Detailed view from below:
(sectional view)
Tension rod with M12 thread on both sides
Assembly Instruction DEGERtraker 3000NT / 3000HD / 5000NT / 5000HD / 6000NT / 7000NT / 9000NT
2012-07-01
Page III-3
top
bottom
Washer M12
Nut M12
Lock nut M12