Advertisement
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait for it to completely cool down before cleaning.
2. Wipe over the outside surface of the unit with a dampened cloth and polish with a soft dry cloth.
3. Wipe any excess food from the power cord.
4. Wash the removable bowl and accessories in warm soapy water and wipe dry.
Trouble Shooting
Fault
The unit is not working
The ice cream is too soft
The Ice Cream is too hard
The timer has not reached 0
but the machine has stopped
and the ice cream is hard
The blade is not turning
Technical Specification
Model
Voltage
DM067-A
230V
50hz
Electrical Wiring
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Probable Cause
The Unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Timer setting too short
Timer setting too long
The ice cream has frozen solid
stopping the blade from
turning. The motor protection
system has engaged to stop the
motor overheating
Blade not fitted to motor axis
correctly
Power
Current
150w
0.7A
Check the unit is plugged in
correctly and switched on
Call BUFFALO agent or qualified
technician
Replace the plug fuse
Check Power Supply
Call BUFFALO agent or qualified
technician
Increase timer setting
Reduce timer setting
Allow the unit to cool before
attempting to restart.
Ensure the removable bowl is
fitted correctly and that the
blade has a good connection to
the motor axis
Capacity
Dimensions
(Litres)
h x w x d mm
1.5
245 x402 x 348
Action
Weight
(kg)
12.2
Advertisement
