Nikon Df User Manual page 374

Release
Release mode
Frame advance rate
Self-timer
Exposure
Metering
Metering method
Range (ISO 100, f/1.4
lens, 20 °C/68 °F)
Exposure meter coupling Combined CPU and AI (collapsible metering coupling
Exposure mode
Exposure compensation –3 – +3EV in increments of
Exposure bracketing
Flash bracketing
White balance
bracketing
ADL bracketing
Exposure lock
n
354
S (single frame), C
L
(continuous high speed), J (quiet shutter-release),
C
H
E (self-timer), M
UP
1–5 fps (C ) or 5.5 fps (C
L
2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2,
or 3 s
TTL exposure metering using 2016-pixel RGB sensor
• Matrix: 3D color matrix metering II (type G, E, and D
lenses); color matrix metering II (other CPU lenses);
color matrix metering available with non-CPU lenses
if user provides lens data
• Center-weighted: Weight of 75% given to 12 mm circle in
center of frame. Diameter of circle can be changed to
8, 15, or 20 mm, or weighting can be based on
average of entire frame (non-CPU lenses use 12-mm
circle)
• Spot: Meters 4 mm circle (about 1.5% of frame)
centered on selected focus point (on center focus
point when non-CPU lens is used)
• Matrix or center-weighted metering: 0–20 EV
• Spot metering: 2–20 EV
lever)
Programmed auto with flexible program (P); shutter-
priority auto (S); aperture-priority auto (A); manual (M)
2–5 frames in steps of
2–5 frames in steps of
2–3 frames in steps of 1, 2, or 3
2 frames using selected value for one frame or 3-5
frames using preset values for all frames
Luminosity locked at detected value with A AE-L/AF-L
button
(continuous low speed),
(mirror up)
)
H
1
/ EV
3
1 2
/ , / , 1, 2, or 3 EV
3 3
1 2
/ , / , 1, 2, or 3 EV
3 3