Language; Decoder (Ext-2) - JVC InteriArt AV-28T77SK Instructions Manual

SET UP menu

LANGUAGE

1 Choose LANGUAGE, then press
the a a or 3 3 3 3 button
a a
A sub-menu of the LANGUAGE function
appears.
LANGUAGE
TV OK
D0002-EK
2 Press the a

DECODER (EXT-2)

If you have a decoder connected to a T-V
LINK compatible VCR, which in turn is
connected to the EXT-2 terminal, use the
DECODER (EXT-2) function to unscramble
the scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel
on the TV
Even if the decoder is working, a
scrambled picture appears.
3 Display the SET UP menu and
choose DECODER (EXT-2)
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
PICTURE TILT
TV OK
D0029-EN
4 Press the 5
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
30
a button
a a
OFF
5 buttons to choose
5 5
5 Press the a a button to complete
a a
the setting
The T-V LINK menu appears.
T-V LINK
DOWNLOAD TV VCR
EXIT
TV OK
D0005-EN
You can send the programme numbers
data to a VCR with the T-V LINK
function.
6 Turn on the VCR, and then press
the a a button to transmit the data
a a
to VCR
The T-V LINK menu disappears once the
data transmission ends.
7 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 to 6
If the DECODER (EXT-2) function has
been set to "ON" but the TV channel
cannot be unscrambled, check the
following:
• Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
• Has the decoder power been turned
on?
• Can the TV channel be unscrambled
with a decoder?
• Do you need to change the VCR
settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
instruction manual.