Advertisement
Step three:
a. No one answer indoor monitor in 5 seconds; it will run video function automatically,(If the
video set to manual. As call, it will video by manual. ) , will until limited time is up.
b. If someone answer call in 30 seconds, it will end ring and enter the talking status.
The red light of the indoor phone will be off, and the
max talking time is 90seconds.
c. If press the
"
"
button, this time is signal talking, indoor monitor with voice,
but outdoor monitor without. (single voice)
button , both outdoor camera and indoor monitor have voice.(two-
d. If press
"
"
ways voice);
Step four:
Press
"
"
button to unlock. If successful open, screen will show a lock open, and
then enter in standby status
Step five:
when under double talking status .Press
" Di "
then all system enter into standby status.
Step six:
when under calling, if no auto video, press
SD card
Step seven:
When under calling, if no auto video press
button
to end videoing and store into the SD card.
Attention: If some one call from outdoor camera as the indoor monitor at talking status. The
communication will be break off. And then received the ring from outdoor camera.
7. Indoor monitor call indoor monitor:
Step one:
a. In standby status, press
"
" button
b. Use
"
" button
choose
for
indoor monitor' ID which you would like to call. Press
" button
confirm. The red light will on in long time the calling status.
Step two:
a. If no signal received in 4 seconds, will be no music from the main calling monitor and
after a sound "Di" to exit the calling status to standby.
b. If the calling signal are received, the two monitors will ring and the red lights will on long
time.
Step three:
a. If no answer from the monitor being called, it will back to standby status after 30 seconds
b. If there is an answer from the monitor being called, the two monitors ring will stop,
the red lights off and
blue
lights on , enter to the two-way talking status. The max talking
time is 90 seconds.
Step four:
at any one of the monitors which are under talking ,then both of these
If press
"
"
monitors will make a sound"Di" and enter to standby status.
Attention: If some one call from outdoor camera as the indoor monitor at talking status. The
communication will be break off. And then received the ring from outdoor camera.
blue
light will ON. And the
"
"button
to hang up, and there will be a sound
"
" button
to take photos and store in the
"
" button
to take video, then press
choose to indoor monitor menu.
- 7 -
MENU
1. Menu function
1. Press
"
"
while standby the main menu showing "Video",
"Code", "Call History", "Exit" six branch menu, and "EXIT" is to exit from
the menu.
2. Use
"
" for selecting
3. The sub-menu of the branch menu
a. Video menu: "Play", "Delete", "Delete all" for option, press
the relevant branch menu.
b. Photo menu: "View", "Set as background", "Delete", "Delete all" for option,
press
"
c. Setting menu: "Tong setup", "Brightness", "Own ID number", "Auto control",
"Flash setup", "Volume setup", "Date setup" or options. Press
enter the relevant branch menu.
d. Code menu: "Go to", 'Send", "Receive", "Clear"
button to enter the relevant branch menu.
e. Call history menu: Would see the call record, you can choose Play" Delete ", or Back"
"
"
Attention: Choose " Exit " will back to last menu.
2. Menu summary
1> Video
a. Press
"
" button enter
b. Use
"
" button
c. If SD card isn' t plugged in, it will show "No SD Card!" and back to menu. If SD card
is plugged in but no video record, it will show "No File!" and back to menu. If SD
"
card is plugged in and has video record, turn to next step.
d. Use
"
" button
e. Use
"
" button
confirming.
When you are playing, press
button
to exit. After you finishing the operation, press
video operate menu automatically.
f. Press
"
" button
2> Photo
a. Press
"
" button
b. Use
"
" buttons
c. If SD card isn' t plugged in, it will show "No SD Card!" and back to menu. If SD card
is plugged in but no photo record, it will show "No File!" and back to menu. If SD
card is plugged in and has photo record, turn to next step.
d. Use
"
" buttons
e. Use
"
" buttons
press
"
"
When you are viewing photos, press
press
"
" button
After you finishing the operation, press
3> Call history
a. Press
"
" button
b. Use
"
" buttons
branch menu, press
"
" to enter
"
button to enter the relevant branch menu.
main menu .
for choosing, press
"
" button to
enter the relevant branch menu
for choosing, press
"
" button to
for choosing Play " Delete ", Delete All " menu, press
"
"
"
"
"
button to pause or continue. Press
gradually to exit, and enter standby。
Menu
for choosing Photo, press
"
" button
for choosing Photo, press
"
"
button photo operate menu
for choosing Play", Set As Background", Delete", or Delete All"
"
"
button to enter.
"
" button
to view the previous photo, and
to view the next. Press
"
"
button to exit.
"
" button
primary menu,
for choosing call history
, press"
- 8 -
"
Photo", "Setting",
the relevant branch menu.
"
"
button enter
f
"
"
button to
4 for
options, press
"
"
"
"
"
video operate menu；
"
" button
for
"
"
or
"
"
"
" button
or it will return to
for confirming
"
"
to exit.
" button
video menu,
Advertisement
