Advertisement
2. Outdoor Camera
Front view
Rear view
B A S I C O P E R A T I O N S
1. Power
O
N /OFF functions
a.
Press ON/OF button when the indoor monitor in off status, the screen will show " O PIZ "
and create Di " tones, then release the button. It is mean that the
"
indoor monitor is entering into ON status.
b.
Press ON/OF button when the indoor monitor is on status, the screen will show
"
Goodbye" and create
" Di "
tones, then release the button. It is mean that the indoor
monitor is entering into OFF status.
c.
The outdoor camera have powered, you can judge the outdoor camera according to the
" Di "
tone. Like one
" Di "
tone mean that this camera is the first camera, two
mean the outdoor camera is the second outdoor camera.
2. ID No. display of the indoor monitor
When the indoor monitor is entering into ON status, the screen shows "1", it is mean
a.
that this is the No.1 indoor monitor.
When the indoor monitor is entering into ON status, the screen shows "2", it is mean
b.
that this is the No.2 indoor monitor.
When the indoor monitor is entering into ON status, the screen shows "3", it is mean
c.
that this is the No.3 indoor monitor.
3. Indoor monitor standby
The indoor monitor is in standby status will showing the signal", ID", Power
symbol",
"
Date", MENU", DEL". The red light shines one time per four seconds, as the
"
"
power enough. If the power is low, the red light shines one time per one second.
As this several seconds later, the screen will enter sleeping power-saving mode.
If there is ringing record, the blue light shines one time per second. The blue light
will be off after records being
blue
①
MIC
②
Infrared light
①
②
③
Camera
③
④
Speaker
⑤
Call button
④
⑥
⑤
Screws
⑥
To
To
Power Supply
E-Lock
12V GND
NC COM NO
battery
"
"
"
.
- 5 -
4. USB function
a.
When SD card inserts USB line under standby status, it will pop up the dialog box: U B",
"
POWER".
U
b.
sing "
" button to select 'POWER', at this time USB only for charge energy, the indoor
monitor works normally.
When select "USB", the indoor monitor can connect with computer. However,
c.
it can't read SD card on the indoor monitor, and maybe the indoor monitor can't
work normally.
5. Monitor function
Step one: Under the standby status,
If only one outdoor camera: Any indoor monitor press
status, blue light will on long time.
If two outdoor camera:
a. Any indoor monitor, press
b. Use
"
" buttons
this, at this time the blue light will be on long time, press
standby..
Step two:
If can receive the signal in five seconds, will successfully connected with outdoor camera
(It default the indoor monitor with sound, and outdoor camera without), and then
enter the normal monitor status If doesn't receive the signal in 5 seconds, then it will
exit monitor and calling status of monitor and call automatically, and return the standby.
Step three:
Under monitor status, indoor monitor with sound, but outdoor camera without. Press "
" button to switch one way or two way talking. (Single and double talking can exchange
many times). Max talking time is 90 seconds.
Under the talking status, press the "
the door, the screen of indoor monitor will show the opening.
Under the monitor status, press the "
After 90 seconds, end the communication, then enter to standby.
Step four:
" Di "
Under talking status, if there is SD card,
Press the "
" button, the pictures will store into the SD card;
Press the "
" button, it will run the video, press again will end the video. The video
also store in the SD card.
6.Outdoor camera call indoor monitor
Step one:
Under the standby, outdoor camera press CALL" button enter the call status. Outdoor
camera will ring. Indoor monitor also ring with pictures.
Step two:
a. If the indoor monitor doesn't answer in 30 seconds, it will exit calling indoor monitor.
b. If the indoor monitor receives signal from outdoor camera, the red light of indoor monitor
will be on long time, and it will have ring and pictures on screen. The nax calling is 30
seconds.
"
"
"
"
button, enter monitor status;
choosing for the number of outdoor camera,
" button can release the door. When opening
" button can end the monitor and return standby.
"
- 6 -
"
S
button will enter the monitor
"
"
button to confirm, at
"
"
button to return to
Advertisement
