Related Manuals for DMXking.com eDMX2
Summary of Contents for DMXking.com eDMX2
- Page 1 Interface USER MANUAL DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1...
-
Page 2: Table Of Contents
Technical Specifications ................................9 Warranty ....................................9 DMXking.com Hardware Limited Warranty ............................ 9 Declarations (FCC & CE) ................................9 Federal Communications Commission (FCC) Declaration of Conformity ..................9 EEC Declaration ..................................... 10 DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1... -
Page 3: Introduction
1. INTRODUCTION Thanks for purchasing a DMXking.com product. Our aim is to bring you high quality products with great features we know you’ll appreciate. We ship only what’s required which is why there’s no CD or printed manual in the box, this is part of our commitment to minimizing environmental impact which also translates into end user savings. -
Page 4: Status Led Table
DMX512 Port A. Green = TX, Red = RX DMX512 Port B. Green = TX, Red = RX 3. DEFAULT CONFIGURATION All eDMX2 units ship with default IP address settings. Please reconfigure for your requirements before use! Parameter Default Setting IP Address 192.168.0.112... -
Page 5: Configuration Utility
Selecting “Firmware Update” will prompt for an appropriate firmware file and upload upon confirmation. A built in boot loader permits updating of the eDMX firmware. Note only signed encrypted firmware files from DMXking.com can be successfully loaded to ensure you won’t brick your device by accident. Future firmware releases for this product will be in the form 0091- 500-VersionMajor.VersionMinor.enc... -
Page 6: Port Tab
Number of seconds between internally initiated RDM Discovery attempt. Setting Discovery Period = 0s will disable RDM which is the default. Broadcast Threshold 0 = Force Art-Net broadcast mode, > 0 Art-Net II/III unicast. DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1... -
Page 7: Dmx Display Function
Note Art-Net II unicast is not supported meaning only Art-Net broadcast streams are displayed. The DMX Display utility works with any manufacturers Art-Net hardware and can be useful for diagnostics and simple testing of DMX512 fixtures. DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1... -
Page 8: Art-Net Node Name
We recommend directly connecting a computer and eDMX device using a crossover cable so there’s no chance of additional eDMX devices accidentally being reset too. Several warnings are presented before the command is sent. DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1... -
Page 9: Compatible Software
The DMXking.com eDMX4 unit is a 4 universe Art-Net device designed for use with computer based show control software. It replaces an entire lighting console allowing the user to perform sophisticated shows with little more than a laptop. There are many free and commercial software packages available and by selecting Art-Net as your DMX device compatibility is guaranteed. -
Page 10: Media Servers / Vj
VISUALIZERS Capture http://www.capturesweden.com/ WYSIWYG http://www.cast-soft.com/ ESP Vision http://www.espvision.com/ SoftPlot http://www.stageresearch.com/products/SoftPlot9/SoftPlot9.aspx LD Assistant http://www.ldassistant.com/ MOBILE APPS Luminair (iPhone/iPad) http://www.synthe-fx.com/products/luminair LightingPad (iPhone/iPad) http://www.alcorn.com/products/lightingpad/index.html ArtNet DMX Remote (iOS) http://lightning-dmxcontrol.com/ LED Remote (iOS) http://arminarzani.com/en/ DMXking.com • JPK Systems Limited • New Zealand 0091-700-2.1... -
Page 11: Technical Specifications
Failure due to operator error or incorrect application of product. Opening the unit voids the warranty. What DMXking.com will do DMXking.com will repair or replace, at its sole discretion, the defective hardware. Return shipping costs from our service facility in New Zealand shall be free of charge. -
Page 12: Eec Declaration
New Zealand declares that the product eDMX2 complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the eDMX2 and is the answer not in the manual?
Questions and answers