Page 1
Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any changes that are made to the unit nor any liability for these changes. Thanks for your choice of our products. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S, www.denver-electronics.com...
Page 2
POWER SUPPLY Plug AC plug into the outlet socket on the unit for connecting the main power. SLEEP TIMER SETTING You can set the sleep timer at power on&standby modes as following instructions: At the standby mode, press SLEEP button repeatedly to cycle through the sleep time options: Release the button, then “WELCOME”...
Page 3
6. Press PLAYLIST UP/DOWN button to cycle through the playlists on the connected DIMMER iPod/iPhone. During playback, press DIMMER button to adjust the light of the LCD screen. 7. Press ALBUM UP/DOWN button to select your desired album for playback on the connected iPod/iPhone.
Page 4
A/V INPUT COMPATIBLE WITH THE FOLLOWING iPod® and iPhone® 1. Connect the A/V jacks on the unit to audio&video source, for example, DVD player with an RCA cable. 2. Press the POWER button to turn the unit on. 3. Press the SOURCE button repeatedly to switch to AV mode. 4.
Page 5
DOCK ADAPTOR COMPATIBILITY TROUBLE SHOOTING PLAY & VIDEO Symptom Possible Cause Solution MODEL CAPACITY BRACKET CHARGE OUTPUT Radio sound distorted. 1. The station is not tuned in. 1. Fine tune the station. iPad 2. There is a poor signal in 2.
Page 6
IMPORTANT SAFETY INSTRUCTIONS The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. When the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Need help?
Do you have a question about the IPT-400 and is the answer not in the manual?
Questions and answers