Connecting Your Devices - JVC 0903-TN-II-VP User Manual

Quick Setup
Step 3 - Connecting your devices
Remove the terminal cover
There are connection terminals behind the covers on the left
and right in the back of the TV. Remove these two covers
before connecting an antenna or other devices. The covers
can be removed by removing the hook at the bottom and
then pull out while slightly lifting. To replace the covers, first
connect the hook at the top of the cover, and then insert the
hook at the bottom.
Note:
• Leave the terminal covers off if they do not fit properly. Do
not force to replace the covers. Doing so may damage the
connection cables and covers.
Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Yes
Do you have a VCR?
Yes
Diagram #2
Do you use a Cable TV Box?
No
Diagram #1
Connections
No
Do you have a VCR?
Yes No
Diagram #3 Diagram #1
13