Wireless > Guest Access - Linksys X1000 User Manual

Linksys X1000
RADIUS
This option features WEP used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select RADIUS as your Security Mode, each device in your
wireless network MUST use RADIUS and the same encryption and
shared key .
RADIuS Server
Enter the IP address of the RADIUS server .
RADIuS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Key Enter the key shared between the router and the server .
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) . The default is 40/64-bit (10 hex digits) .
Passphrase
Enter a passphrase to automatically generate the WEP key . Then
click Generate .
Key 1
If you did not enter a passphrase, enter the WEP key manually .
Disabled
If you choose to disable wireless security, you will be informed that wireless
security is disabled when you first attempt to access the Internet . You will given
the option to enable wireless security, or confirm that you understand the risks
but still wish to proceed without wireless security .
NOTE
When wireless security is disabled, anyone can access your wireless
network at any time .
Wireless > Guest Access
The Guest Access feature allows you to provide guests visiting your home with
Internet access via wireless . The guest network is a wireless network separate
from your local network . The Guest Access feature does not provide access to
the local network and its resources, so your guests will not have access to your
computers or personal data . For example, the guest computer cannot print to
a printer on the local network or copy files to a computer on the local network .
This helps minimize exposure of your local network .
NOTE
To learn more about any field, click Help on the right side of the
screen .
Advanced Configuration
17