Advertisement
Installing the Mobile Connect software
on the Windows 2000/XP platform
Caution:
Do not insert the Mobile Internet card until you have finished installing
the Mobile Connect software on the Windows 2000/XP platform and
are instructed to do so.
Mobile Connect from Bell is a software application that allows you to
manage your wireless connections, both over the data optimized high
speed mobile network from Bell and over 802.11 Wi-Fi. You will need
to install this software and then select the Mobile Internet card when
prompted to do so:
1. Insert the installation CD into your CD-ROM drive. The Mobile Connect
installer should start automatically. If it does not start, select Start,
Run and enter d:\setup.exe, where d: is your CD-ROM drive letter.
2. Follow the Mobile Connect InstallShield
through the process of installing the Mobile Connect application.
Use the Next and Back buttons to navigate through the installation
wizard. To continue with the installation, you must click Yes to accept
the terms of the License Agreement.
Wizard. It will guide you
®
Advertisement
