JVC 0807TNH-II-IM User Manual page 21

Connecting to an AV Receiver using your television's
V3 Smart Input
By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
AV Receiver
MONITOR
OUT
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT to the S-Video INPUT-3
on the back of the TV.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT to the VIDEO
INPUT-3 on the back of the TV.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT to the Y
VIDEO INPUT-3 on the back of the TV.
4) Connect a Blue Component Cable from the AV Receiver's P
VIDEO INPUT-3 on the back of the TV.
5) Connect a Red Component Cable from the AV Receiver's P
VIDEO INPUT-3 on the back of the TV.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V3 Smart Input function is turned on.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V3 Input as the V3 Smart Input. In this case we recommend using the
S-Video connection.
TV Rear Panel
P
R
P
B
Y
MONITOR OUT
Quick Setup
MONITOR OUT to the P
B
MONITOR OUT to the P
R
B
R
21