Getting Started; The Remote Control; Basic Operation - JVC 0807TNH-II-IM User Manual

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first need
to install the batteries (included).
Raise the latch on the remote's back cover to remove.
Insert two batteries, carefully noting the "+" and "–"
markings. Place the "–" end in the unit first. Snap the
cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes (ex. VCR,
DVD) may have to be reset. See pages 69 - 74.

Basic Operation

Turn the television on and off by pressing the P
of the remote. If this is the first time you are turning on the TV, the interactive
plug in menu appears.
• At first, to watch your TV, select the TV mode by pressing the M
the remote control before you turn the TV power on.
• See page 58 to 68 for details regarding the remote control buttons.
Using Menu Buttons
To use the menu functions, press the M
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
12
button at the top right corner
OWER
button. Next,
ENU
button on
ODE
OK
DVR
STATUS
POWER