Remote Control - JVC 0708TSH-II-IM User Manual

Remote Control

The following pages gives you a brief description of each button's function. For more detailed
information on the remote control buttons, see pages 19 - 21.
Change the aspect ratio of the image on your
For V4 (Video-4) and V5 (Video-5) you must select the signal
input type fi rst (ie. composite, S-Video, or component). To do
so, you need to press the V4 or V5 button until the correct
type is highlighted. Select "Composite 1" for composite video
signal input, "S-Video" for S-video signal input, or "Component
1" for component video signal input. Select "Composite 2" for
composite video signal input or "Component 2" for component
video signal input.
Choose how long the TV will stay on before
availability in the program). See page 21.
Lets you decide the input channel and select
it. After pressing the remote 0 - 9 buttons,
Lets you go back to the previously selected
Programming information. (Digital channels
10
TV screen. See page 20.
Turns the TV on or off.
Switch between devices
connected to Video-1, 2, 3,
Change channels.
turning off. See page 19.
Used to select sub channels.
(Digital channels only). See page 21.
Listen to a program in stereo, mono or
another language (SAP). (Depending on
press TUNE.
channel. See page 19.
only). See page 21.
4 and 5.