Sanyo SGP-EGW190M Technical Data Manual page 74

Separately Sold Parts
3) Attach the adapter for the exhaust extension
a) Insert the exhaust extension adaptor in the direction of the arrow. (The adaptor can be inserted
easily if you use lubricant.)
b) Use the two M4 screws removed in Step 2) b to fix the exhaust extension adaptor to the outdoor
unit top panel.
4) Attach the exhaust top
a) Be sure to attach the supplied exhaust top to the very end of the pipe.
b) Connect the exhaust top and KP pipe by sufficiently inserting the exhaust top until the male side
connector warning mark (red line). Refer to Figure 6. A clicking sound will be heard when the
top is connected properly.
c) Be sure to attach the exhaust top vertically as shown in Figure 5.
1. Outdoor unit related parts
F-3
Figure 4