Web Password - JVC VR-616 Instructions Manual

● How to Setup
1) Check the box to activate passwords.
2) Select a new password and then enter again for confirmation.
3) Select a new password by using Jog.
4) Enter "New Password" and "Confirm" through Channel Selection
buttons. Please use the each 1-9 Channel Selection button.
5) As "Setting" select, password is changed.
Notice
!
If you forget the password, you can not operate the system! Please be
sure to remember the password or write it down in a secure place.

5.7.7.4 Web Password

● This is for remote control by using Network.
● A user ID containing 8 numeric characters is possible.
● After selecting by jog, press the ENTER button for setup. Please use the each
1-9 Channel Selection button.
-- 82 --
JVC VR-616