Verify Wan / Lan / Wlan Connection - SonicWALL TZ 180 Getting Started Manual

Verify WAN / LAN / WLAN Connection

Once the cables are correctly connected, the WAN, LAN (1) and WLAN lights
on the front panel of your SonicWALL TZ 180 Wireless illuminate as illustrated
below:
Note:
In order to connect to the SonicWALL TZ 180 Wireless, your
computer must be set to accept dynamic "DHCP" addressing.
For more information on configuring DHCP, turn to Appendix A:
Configuring DHCP IP Addressing section, on page 27.
SonicWALL TZ 180 Wireless Getting Started Guide
Link/ACT (WAN / LAN 1) - A solid light
Indicates a network connection is present
between the SonicWALL TZ 180 Wireless
and another network appliance. A blinking
light indicates connection activity.
10/100 (WAN / LAN 1) - A green light
Indicates a 10 Mbps port connection. An
amber light indicates a 100 Mbps port
connection.
WLAN (on/act) - A solid light indicates the
wireless transmitter is powered on. A
blinking light indicates wireless activity.
Page 15