Chapter 12 Disassembly & Reassembly; Overhaul Disassembly & Reassembly - Samsung PS42S5HX/XEH Service Manual

12. Disassembly & Reassembly
12-1 Overhaul Disassembly & Reassembly
Caution
- Be sure to separate the power cord before disassembling the unit.
- Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Drive Board, Y Drive Board,
etc. (Sparks may be generated by an electric charge, and there is a danger of electronic shock.)
- Check that the cables are properly connected referring to the circuit diagram, when disassembling or assembling the unit and
take care not to damage the cables.
- Take care not to damage the Glass Filter at the front.
- Assemble the boards in the reverse order of the disassembly.
12-1-1 Separation of Stand
Part Name
Stand
① Place the unit down and remove the 4 screws to
separate the stand.
: BH,+,S,M4,L35,ZPC(BLK)
6009-001432
Caution: Take care not to damage the front glass
when placing the unit down.
② Loosen and remove the screws and Stand remove.
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
12-1