Other Issues Related To Other Products - Samsung PS42S5HX/XEH Service Manual

14-1-12 Other issues related to other products

Problem
A fixed screen can cause
permanent damage to the TV
Braun tube.
Confusion between the
ANYNET Port and the
SERVICE Jack Port
Length of DVI Cable / PC RGB
Cable
When a digitally distributed TV
user receives HD-rated
broadcasts:
When a digital distributed TV
user selects normal size (4:3) to
receive SD-rated digita
broadcasts:
When a digitally built-in TV user
receives SD (air) broadcasting:
When selecting a picture size of
4:3 in connection with a
computer or a multimedia
device:
Samsung Electronics
Braun, PDP and LCD TVs can all be damaged. When a still image is displayed in a sequence,
this can leave stains or after-images due to the characteristics of the panel.
However, the DLP TV has the advantage that no stains or after-images are left on the screen.
The DLP TV has mirror pixels on the DMD panel that project the beam onto the screen, in
which the mirror is a digital representation of 0s and 1s, leaving no trace of light.
The mirror returns to a blank state so that no stains or after-images are left.
The SAMSUNG SKY500N model has both an ANYNET port and a SERVICE jack port.
Because the shape of the ANYNET port on the DLP TV is the same as that of the SERVICE
jack port of the SKY500N, it fails to turn the TV off after a connection has been reported.
The ANYNET port uses an RS232 port called Phone Jack, and the SERVICE jack port also
uses the RS232 port. However, you must not connect the SERVICE port and the ANYNET port.
Check if the port is the ANYNET port or the SERVICE port before connecting the port.
Even if the TV cannot be turned on after connecting, the TV will turn on if you disconnect the
connection.
- A too long DVI cable may cause a malfunction or degradation of the visual quality due to an
attenuation of the signal. There is no recommendation for the cable length at present.
In general, although a cable length of up to 5 meters should work, please check if video is
properly displayed on the screen after connecting. If you think the length of the cable is longer
than for normal use, check the visual quality of the video on the screen and shorten the
length, if necessary.
- This also applies to the PC RGB (D-Sub) cable. When the length of the cable is longer than
for normal use, video may not be displayed on the screen. In this case, shorten the cable
length.
The digital distributed TV (Ready Technique) can render HD sources as HD-rated.
However, you need to install a set-top box for this purpose. The digital TV alone cannot render
HD broadcasting as HD-rated. Install the formal set-top box for HD broadcasts.
The digitally distributed TV (Ready Technique) renders any broadcasting service as SD-rated.
However, when connected to a set-top box, the digital TV renders HD broadcasts as HD-rated
and renders SD as SD-rated. The screen size is scaled to 4:3.
The digitally integrated TV ("built-in" type) renders SD broadcasting as SD-rated.
This can be understood easily.
Even a high-resolution TV cannot improve a low resolution picture into high quality.
In contrast, an SD-rated TV cannot represent HD broadcasting as HD because the resolution of
the TV is lower than the original.
The representation capability of SD or HD-rated depend entirely on the TV set. The HD TV can
render HD broadcasting as HD-rated only when it receives HD sources.
In the meantime, the HD TV renders SD as SD-rated when it receives SD sources.
The picture size has nothing to do with the resolution; TV models like SVP-XXL3HD or
SVP-XXL6HD have a size adjustment feature to 16:9, 4:3, Panorama, Zoom1, Zoom2 and Auto
Wide. This is about the aspect ratio of the top and bottom boundaries to the overall screen and
users can select their preference.
Descriptions
Reference Information
14-7