Bpm Delay - M-Audio NRV10 User Manual

Control Control
Call-out # Picture
1 Bypass
Control
2 Solo Control Click the Solo Control to bypass or enable other effects in the
3 Previous
Preset
Control
4 Preset
Control
5 Next Preset
Control
3.3

BPM Delay

BPM Delay
is an effect that creates delayed repetitions of the incoming signal. Below is
BPM Delay
an image of
control.
Control Control
Call-out # Picture
1 Level
Control
17
Control
Name
Click the Bypass Control to bypass or enable the effect.
same channel.
Click the Previous Preset Control to load the previous preset
in the list.
Clicking the Preset Control opens a menu that displays
a preset list for the effect. Click the desired preset to load it.
Click the Next Preset Control to load the next preset in the
list.
. Refer to the table below the graphic for details of each
Control
Name
The Level Control sets the balance between the processed and
unprocessed signal, where the 12 o'clock position outputs
equal amounts of processed and unprocessed signal levels.
Rotate this control clockwise to increase the amount of the
unprocessed signal, and rotate it counterclockwise to increase
the amount of the processed signal in the output of the effect.
Control Description
Control Description