How To Use The Joystick; How To Configure The Locomotive Roster - Bachmann Dynamis User Manual

How to use the joystick

9. Push the joystick upwards to move the locomotive, bring it downwards to bring
the locomotive to a stop. Change direction by pressing the direction button beneath
the joystick.
10. Leaving the first train running, select a second locomotive address using the
joystick or the [LOCO] key. Set the train running. Move back to the first train by
scrolling with the Joystick. When selecting another moving train the bar graph for
speed immediately shows current speed of that train so that any change to speed is
made from the speed at which it is currently travelling.

How to configure the locomotive roster

There is a 40 locomotive roster database recording details of the locos. When first
selecting a locomotive address to run a roster entry is created with default values.
Once there are 40 roster entries one must be deleted to allow any other
locomotives to be run.
EXAMPLE: Changing the address and defaults of locomotive
Long addresses ("4-digit") must be written to a decoder by programming using a
Service Track with no other locomotives present otherwise all locomotives will
Increase speed, scroll through menus, text input
Decrease speed, scroll
through menus, text input
Dynamis User Guide
Scroll through
locomotives roster
and menus, text
input
9