How To Manage Consists - Bachmann Dynamis User Manual

SET FUNCTIONS
[ACCEPT]
LATCHING
Use the function keys to select the function outputs of the decoder that are to latch.
When the indicator shows on the screen the function is set to latch.
[ACCEPT]
The Screen now shows
LOC 4468 1/128
MALLARD
6. Deleting a locomotive
The roster entry can be deleted when no longer required. The currently controlled
locomotive cannot be deleted unless it has a speed of 0.

How to manage consists

'Consist' is a term used to describe more than one locomotive or railcar each with
its own decoder address being run at the same time as a single entity. 'Double
header' or 'multiple unit' might also be used, but for simplicity the term 'consist' will
be used here.
1. To add current loco to a consist:
NOTE a locomotive in a consist may have to run 'backwards' when the consist is
running forwards – for example a pair of diesel locos with their cabs outwards. Use
[DIRECTION] to set one of the pair in the reverse direction before putting in the
consist.
Press [CONSIST]
ADD TO CONSIST
CONSIST ID 0
A consist cannot have the same number as a locomotive already in the roster
- choose a consist number in range 1 to127
Dynamis User Guide
13