Blackberry Curve Getting Started Manual page 44

address to your BlackBerry Curve using the email setup web site, verify that you have
received an activation message on your BlackBerry Curve from the BlackBerry
Service. If you have not received an activation message (the message might take a
short period of time to arrive), use the email setup web site to send a service book to
your BlackBerry Curve .
• If you have not received a registration message from the wireless network, register
your BlackBerry Curve . From the Home Screen, click "Settings", click "Options", then
click "Advanced
"Register Now".
• Resend the message. Open the message. Press the
I am not receiving messages.
Try performing the following actions:
• Verify that your BlackBerry
in a wireless coverage area, you should receive messages when you return to a wireless
coverage area.
• If you created a BlackBerry email address or added an existing supported email
address (up to 10) to your BlackBerry Curve using the email setup web site, verify that
you have received an activation message on your device from the BlackBerry
Service. If you have not received an activation message (the message might take a
short period of time to arrive), use the email setup web site to send a service book to
your device.
• If you have not received a registration message from the wireless network, register
your device. From the Home Screen, click "Settings", click "Options", then click
"Advanced
"Register Now".
• If you use email message fi lters, verify that your email message fi lter options are set
correctly.
44
Options". Click
®
Curve
Options". Click "Host Routing
"Host Routing Table". Press the
MENU
™
is connected to the wireless network. If you are not
Table". Press the
®
key
MENU
key . Click "Resend".
® Internet
key . Click
MENU
®
BlackBerry
Internet
. Click
™
Curve