Playing Back Photo/Music/Video Via Usb - Sony KLV-22BX300 Service Manual

Playing back photo/music/video via USB

You can enjoy photo/music/video files stored in a Sony digital still camera or camcorder through a USB cable or
USB storage device on your TV.
Connect a supported USB device to the TV.
1
Press MENU.
2
Press F/f to select "Photo", "Music" or "Video".
3
The thumbnail view of file or folder appears.
4
If more than one USB device is detected, select "Device Selection" from the list of available
options and press
Press F/f/G/g to select a file or folder, then press
5
When you select a folder, select a file, then press
Playback starts.
Photo Thumbnail view Auto Display
Allows you to enjoy the feature of "USB Auto Start" (page 25).
• While the TV is accessing the data on the USB device, observe the following:
– Do not turn off the TV or connected USB device.
– Do not disconnect the USB cable.
– Do not remove the USB device.
The data on the USB device may be damaged.
• Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any
connected devices or the TV.
• USB playback is supported for the following photo file formats:
– JPEG (JPEG format files with the extension ".jpg" and conforming to DCF 2.0 or EXIF 2.21)
• USB playback is supported for the following music file format:
– MP3 (files with the extension ".mp3" that have not been copyrighted)
• USB playback is supported for the following video file format:
– MPEG1
– MPEG2
• The file name and folder name may not display correctly in some cases.
• When you connect a Sony digital still camera, set the camera's USB connection mode to Auto or Mass Storage. For more
information about USB connection mode, refer to the instructions supplied with your digital camera.
• Check the website below for updated information about compatible USB devices.
http://www.sony-asia.com/bravia/flash.html
• Use a USB storage device that is compliant with USB mass storage device class standards.
To display a photo — Picture Frame
You can display a photo on the screen for a selected period of time. After that period, the TV automatically switches
itself into standby mode.
Select a photo.
1
See "Playing back photo/music/video via USB" (page 17).
Press TOOLS while the selected photo is displayed, then press F/f to select "Picture Frame
2
Image" and press
Press RETURN to return to the thumbnail view.
3
Press G/F/f to select "Picture Frame", then press
4
The TV is switched to Picture Frame mode, and the selected photo is displayed on the screen.
To set the duration of displaying a photo
Press TOOLS, then select "Duration" and press
The duration appears on the screen.
To return to the thumbnail view
Press MENU or RETURN.
• If the photo is selected from a USB device, it must remain connected to the TV.
• If "Sleep Timer" is activated, the TV will automatically switch into standby mode.
, then press F/f/G/g to select a USB device and press
.
.
.
.
. Then, select the duration, and press
.
.
17
GB