Sony KDS-50A2000 Service Manual page 202

Other Information
54
9
Put the outside lamp cover back in its place.
Replace the cover, inserting it from the left side. Press the two tabs on
the right side to secure the cover.
10
Turn on the TV and set the
settings (see page 47). This setting is necessary to inform you when the
next lamp replacement is needed.
✍
Until you set the Lamp Replacement option, a message
announcing that the lamp is at the end of its life will appear every
time you turn on the TV.
✍
Consult your Sony dealer for a Sony XL-5200 replacement lamp.
✍
Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. Rough handling may cause the TV to fall,
damaging the TV, the TV stand and the floor.
The used lamp
For customers in the United States:
This product contains mercury. Disposal of this product may be regulated if
sold in the United States. For disposal or recycling information, please
contact your local authorities or the Electronics Industries Alliance
(http://www.eiae.org).
❑
Do not leave the used lamp near flammable materials or within the
reach of children.
❑
Do not pour water onto the used lamp or put any object inside the lamp.
Doing so may cause the lamp to burst.
For replacement lamp information visit:
U. S. residents: http://www.sonystyle.com/tv/
Canadian residents: http://www.sonystyle.ca/tv/
option in the
Lamp Replacement Setup