Sony KDS-50A2000 Service Manual page 200

Sxrd projection tv
Hide thumbs Also See for KDS-50A2000:
Table of Contents

Advertisement

Other Information
52
3
Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
4
Remove the outside lamp cover.
Release the two clamps as shown in the illustration below.
5
Remove the lamp door.
Turn the screw counterclockwise and slide the lever to the left. Remove
the door.
6
Pull out the lamp.
Hold the indented grooves on the top corners of the lamp, as shown in
the illustration, and pull the lamp straight out. If the lamp is hard to
remove, pull the right side of the lamp for additional traction.
Hold this part of the lamp

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kds-50a2010Kds-55a2000Kds-60a2000Kds-60a2010

Table of Contents