LG CU405 Service Manual page 145

9. Calibration & RF Auto Test Program
9.1.2 Setup file (Info_Db.txt)
/*cal*/[Default]=[CU405]
1 2 3
/*cal*/[CU405]=[..\\Cal_Model\\CU405\\LG_RfCal_Qu CU405 Ag_099.dll]
4
[ezlooks]=[off]
[batcal]=[off]
[svc]=[off]
[standalone]=[off]
[tescom]=[off]
5
[process]=[cal]
1: Indication of 'cal process'
2: Model name which is displayed on Hot Kimchi program
3: Relative path of Main Sequence dll file from Hot_KimchiD.exe
4: You can change this as 'on' or 'off'(should be in lower case; on, off)
5: You can change this as 'auto' or 'cal'(should be in lower case; on, off)
6: Relative path of auto model procedure, spec, setting file from Hot_KimchiD.exe
LGE Internal Use Only
'on' or 'off'. (use only lower case)
'auto' or 'cal'. (use only lower case)
Copyright © 2007 LG Electronics. Inc. All right reserved.
- 146 -
Only for training and service purposes