Table of Contents
Advertisement
Head restraint height and
angle adjustments on electric
seats
3
To adjust the angle of the head
restraint, push back or pull for-
ward section C of the head re-
straint until you reach the desired
position.
To raise it, pull upwards.
To lower it, press on the control
D to unlock it, and simultaneous-
ly on the head restraint itself.
To remove it, press on the control
D to unlock it, then pull it upwards.
58
C O M F O R T
Massage function
This function provides the driver
with a back massage. It only oper-
ates when the engine is running.
Press on button A .
The warning lamp comes on and the
massage function is activated for a
period of 1 hour. During this time,
massage is performed in cycles of
6 minutes (4 minutes of massage fol-
lowed by 2 minutes break). In total,
the system will perform 10 cycles.
After 1 hour, the function is deacti-
vated. The warning lamp goes out.
Deactivation
You can deactivate the massage
function at any time by pressing on
button A .
The Welcome function
The welcome function assists entry
and leaving the vehicle.
After switching off the ignition and
opening the driver's door, the seat
moves back automatically and then
stays in this position, ready for the
next entry to the vehicle.
When switching on the ignition, the
seat moves forward to the memo-
rised driving position.
When moving the seat, take care
that no person or object hinders the
automatic movement of the seat.
This function is deactivated by de-
fault. You may activate or deactivate
this function using the "Main Menu"
on the instrument panel screen. To
do so, select "Vehicle parameters/
Comfort/Driver welcome".
Advertisement
Table of Contents
