Thermostatic Switch - Honda VF1000F 1985 Shop Manual

SWITCHES
Remove the fairing (page 14·') and disconnect the fuse box
couplers (6P and 4P Red ).
Rem ove the two screws and fuse holder from the top bridge.
VF1000F -II MODEL
Remove the fuse box cover.
Rem ove the fairing (page 14-') and disconnect the fuse box
couplers (6P and 4P Red).
Remove the t wo screws and fuse holder.
THERMOSTATIC SWITCH
The cooling fa n motor is actuated
by
the thermostatic switch
located in auxiliary radiator.
If the fen motor does not stan, disconnect the black and green
leads from the thermostatic switch and short them together
with a jumper wire.
Turn the ignition switch on.
The cooling fan motor should start running.
If
it does not start, check for battery
voltage from the black
lead (positive) to black/blue (negative) of the fan motor
coupl er.
If there is no voltage, check fo r a blown or faultv fuse. loose
terminals or connectors, or an open circuit.
If it start, inspect the fan thermostatic switch as follows:
21-7