JVC DR-MH300BEK Instructions Manual page 31

If using an external receiver
E
Set up the external receiver.
A
Select AExternal Receiver 1B.
SELECT
CONFIRM
B
Check the message screen.
CONFIRM
C
Select and confirm on the type of
reception.
0
Select ACableB, ASatelliteB or ATerrestrialB.
SELECT
CONFIRM
D
Select and confirm on the provider.
E
Select and confirm on the brand.
F
Select and confirm on the socket.
0
Specify the terminal connected to the external
receiver.
G
After the message is displayed, check
and confirm on the connection.
0
The control signals are transmitted to the
external receiver in the test.
H
Confirm the completion message.
CONFIRM
0
Returns to the ASetupB screen.
Set up a second or third external receiver if necessary.
F
Exit setup.
Proceed to step G.
External Receiver 1
None
Terrestrial
Download programme data before using
the GUIDE Plus+ system
F G
/ Turn off this unit.
0
It takes about 24 hours to download sufficient data.
0
If the unit is turned on while downloading, the
download will be cancelled.
0
The programme listing data download is given
priority from 03:00 to 04:30, and VPS/PDC recording
cannot be performed properly. Set AVPS/PDCB to
AOFFB if performing timer recording at this time.
0
AEPGB is displayed on the front display panel during
downloading.
0
If you are using an external receiver, leave it on and
tune to your Host Channel. AHost Channel ListB
[ P33]
If your external receiver is not in the list
(Alternate Setup)
Operate from step E.
A
Select and confirm on
setting.
B
Exit setup.
C
Tune the external receiver's channel to the host
channel.
0
Refer to AHost Channel ListB [
D
Leave the external receiver on.
E
Turn off this unit, and wait for one night.
The GUIDE Plus+ system will be automatically
updated. As new receivers will be added, search for
your receiver and complete the settings.
In order to use the programme listing, you need to
download the programme data using the new settings.
Turn off this unit, and wait for one more night.
A B
None for the brand
P33].
EN I 31