Specifications
1 System Components
1.1 Standard Components
(1) DRYPIX 7000 main unit ......................................................... 1
(2) Image buffer memory board 256MB ...................................... 1
1.2 Options
Supply film tray, 8"×10" film kit, Add-on memory (256MB), Sorter
1.3 Supplies
Fuji Medical Dry Imaging Film DI-HL (Blue-base), DI-HLc (Clear-base), DI-ML (Blue-base)
Cutter
2 Processing Capacity
Max.: Approx. 180 films (14" × 17") / hour.
Max.: Approx. 240 films (26 × 36cm) / hour.
* Note that the processing capacity in actual operation is dependent on the model and usage
of a connected modality.
3 Applicable Film
Fuji Medical Dry Imaging Film
35.4 × 43.0cm (14"×17")
35.4 × 35.4cm (14"×14")
25.7 × 36.4cm (26×36cm)
25.4 × 30.5cm (10"×12")
20.3 × 25.4cm (8"×10")
4 Recording Pixel Size
100μm (Standard)
50μm (High resolution)
5 CR Image Size Reduction
When you printed a CR Image in real size, printed image size will be almost 100% of reduction
rate.
* At the printout from the modality, the size of image is automatically scaled according to the
print area on the film.
6 Gray Scale
14bits (16384 levels)
7-2
(One-tray, two-tray and three-tray specification types are available.)
100 sheets / pack
100 sheets / pack
150 sheets / pack
150 sheets / pack
150 sheets / pack
DI-HL
DI-HLc
(Blue-base)
(Clear-base)
DI-ML
(Blue-base)
×
×
006-235-50 2006.09