Remote Control - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

Remote Control

7 m
Remote control
signal sensor
Setup
Remote Control
Clock
Tuning
Owner ID
Disc
Picture
System Update
Sound
Initialize
Display
Connection
Remote Control
VHS
SELECT
TAB
Others
DVD 1
DVD 2
DVD 3
SELECT
ENTER
6
Point the remote control at the sensor of the unit. Avoid obstacles along the
transmission path. The maximum reach of the remote control is 7 metres directly in
front of the unit. Make sure that the transmission window and the sensor on the unit
are clean. The process can be impaired by direct sunlight and glass cabinet doors.
Child protection
You can lock the buttons on the unit and the remote control.
Press and hold the RETURN and ENTER buttons until [X HOLD] appears in the
display. The buttons on the unit are locked.
To unlock the child protection, repeat the process until [X HOLD] disappears.
Operating a television
Change the code on the remote control to control your TV.
Press and hold the TV on and off button.
Enter the two-digit code for your television.
You must repeat this process after changing the batteries.
Trademark
Panasonic
AIWA
AKAI
BLAUPUNKT
BRANDT
BUSH
CURTIS
DESMET
DUAL
ELEMIS
FERGUSON
GOLDSTAR/LG
Some television models of the listed brands (e.g. older Panasonic units) cannot be
controlled via the remote control.
Switching to AV input on your Panasonic television
Press AV.
Switches between TV reception and AV input each time the button is pressed.
Setting up the remote control
DVD 1
If you are using another Panasonic unit at the same location, change the setting of
the remote control so that you can operate the units independently of each other.
Set up the remote control for the unit.
Press FUNCTIONS.
Select [To Others] with
Select [Setup] with
Select [Others] with
Select [DVD 1, 2 or 3] with
Apply the selected setting [DVD 1, 2 or 3] to the remote control.
Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at
RETURN
least 2 seconds.
Exit the menu with RETURN.
If the remote control setting does not match that of the unit, [DVD 1, 2 or 3] appears
on the unit's display.
Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for
at least 2 seconds.
If you want to operate two units independently of each other using the same
remote control, then change the the remote control setting.
Code Trademark Code
01-04,45 GOODMANS 05,06,31
35 GRUNDIG
27,30 HITACHI 22,23,31,40-42
09 INNO HIT
10,15 IRRADIO
05,06 ITT
31 JVC 17,39
05,31,33 LOEWE
05,06 METZ 28,31
31 MITSUBISHI 06,19,20
10 MIVAR
31 NEC
and confirm with ENTER.
and confirm with ENTER.
, [Remote Control] with
and confirm with ENTER.
Trademark Code
NOKIA 25-27
09 NORDMENDE 10
ORION 37
34 PHILIPS 05,06
30 PHONOLA 31,33
25 PIONEER 38
PYE 05,06
07 RADIOLA 05,06
SABA 10
SALORA 26
24 SAMSUNG 31,32,43
36 SANSUI 05,31,33
and confirm with ENTER.
Trademark Code
SANYO 21
SBR 06
SCHNEIDER 05,06,29-31
SELECO 06,25
SHARP 18
SIEMENS 09
SINUDYNE 05,06,33
SONY 08
TELEFUNKEN 10-14
THOMSON 10,15,44
TOSHIBA 16
05,06
WHITE WESTINGHOUSE