Page 2
SAFETY ’ ’ MPORTANT OTES S AND Ventilation Always ensure adequate ventilation to the amplifier. Do not obstruct the ventilation holes in the cover or base. Should the amplifier exceed its safe operating temperature it will automatically reduce its volume to a safe level thus allowing it to cool.
Page 3
M2120E USER INSTRUCTIONS The M2120E is an integrated 5 input 120 Watt free standing or rack-mounting amplifier powered from a 230 Volt AC supply. Each of the 5 inputs has separate volume, bass and treble controls. An output level 4 bar LED display indicates at 5% 25% 50% and 100% output.
Page 4
M2120E Integrated Technical Specification Rated output power 100V line 230V AC supply 120W 83 Ohms THD 1 kHz rated output Aux input 230V AC supply Less than 0.5% typically 0.2% Typical output power 1% THD 100V line 150W 66 Ohms...
Page 5
SPEAKON LOUDSPEAKER OUTPUT CONNECTIONS 100V 100V LINE FIG 1 LOW Z BALLANCED 100V LINE SELECTION SPEAKON LOUDSPEAKER FIG 2 OUTPUT CONNECTOR ADD LINK TO EARTH PC1210B OUTPUT CENTRE TAP CT-LK GND BK Y BL RD W G FIG 3 DIL SWITCH (1 PER INPUT) XLR or PHONO - INPUT 5 ONLY ON = XLR MIC/LINE OFF = PHONO 100mV...
Page 6
Fig 5: Location and Orientation of Connectors for OPT33 and OPTEQ Issue 2 Page 6 of 8...
Need help?
Do you have a question about the M2120E and is the answer not in the manual?
Questions and answers