Additional Options; Factory Default Settings - Miele dishwasher Operating Instructions Manual

Additional options

Factory default settings

If you have altered any settings from
the factory default, you can reset them
back to the factory default settings as
follows:
^ Switch the dishwasher off with the
On/Off button K.
^ Turn the programme selector to the
"12 o'clock" position.
^ Press the Start/Stop button in and,
whilst holding it in, switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
for at least four seconds until the
"Start/Stop" indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
^ Turn the programme selector to the
"11 o'clock" position.
The "Wash/Rinse" indicator light will not
be lit up.
^ Press the Start/Stop button.
The "Wash/Rinse" indicator will now
flash briefly at intervals.
^ Turn the programme selector to the
"9 o'clock" position.
The Wash/Rinse indicator light shows
whether a setting other than the factory
default setting has been set.
– If the Wash/Rinse indicator light is
flashing:
All settings are factory default
settings.
– If the Wash/Rinse indicator light is
not lit up:
At least one setting has been altered
from the factory default setting.
^ To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
^ Switch the dishwasher off with the
On/Off button K.
Operation
35