Preset Tuning; Selecting The Fm Reception Mode; Reducing The Noise Of Am Broadcast - JVC XV-THC60 Instructions Manual

Toner operations [
See page 36 for button locations. I
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
• Topresetthe stations
7 Tune in the station you want to preset•
• If you want to store the FM reception mode _br an FM
station, select the reception mode you want. See "Selecting
the FM reception mode" on the right column.
Example: When the system is tuned in to 103.5 MHz.
_"
1 0 3.50"'
2 Press MEMORY.
'_-,',_"_ 1 0 3.5 0 "'
-'. CH -- --_.
While "CH" and "_ _" are flashing:
3 Press number button(s) (1-10, _10) to
select a preset number you want.
• For details on using the nmnber buttons, see "How to use the
number buttons". (See page 22.)
Example: When the preset channel 1 is selected.
If the setting is canceled before you finish, start from step 2
again.
While the selected number is flashing:
4 Press MEMORY.
"STORED" appears on the display window.
The station is assigned to the selected preset nmnber.
If the setting is canceled before you finish, start from step 2
again.
5 Repeat steps I to 4.
• Storing a new station to a used number erases the previo_ sly
stored one.
• Totune in to a presetstation
7 Press FM/AM repeatedly to select FM or
AM.
2 Press number button(s) (1-10, _10) to
select a preset number.
• For details on using the number buttons, see "How to use the
number buttons". (See page 22.)
NOTE
• You can also select a preset number by pressing Cursor I_ / _1.
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
• While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
• AUTO:
When a program is broadcast in stereo, ?_u will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations.
• MONO:
Reception will be improved although you will lose the stereo
effect. (The MONO indicator lights on the disphLv window.) In
this mode, you will hear noise until you are tuned in to a station.
When listening to an AM broadcast with a lot of noise interference,
you can change the Beat Cut mode to reduce the noise.
• While listening to an AM station
Press FM MODE.
The current Beat Cut mode appears on the display window.
Each time you press the button, the Beat Cut mode changes.
• Choose "BEATCUTI" or "BEATCUT2" according to which gives
clearer sound.
37