Basicoperations; Turning The System On/Off - JVC XV-THC60 Instructions Manual

Basicoperations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control _br operations unless
otherwise noted.
IMPORTANT
Befl_re using the remote control fl_r the flAlowing
operation;
• Set the remote control mode selector to AUDIO.
AUDIO _
I The buttons described below are used on pages 16 to 18. I
gource
selecting
button s
DISC 1-5 --
Cursor
ENTER
• USR I
DVD MEMORY FM/AM AUDIO
D_sc I oBsc2 DRSC 3 lJ
@@@ol
D_sc@4 _
©©©
©©©
-- 0/I AUDIO
I
Remote
selector
VOL +/-
MUTING
/pl0ybottont
_ CZ2 CZ2CZ2
CZ2 _2 CZBCZ2
SLEEP
SCAN MODE II
LEVEL +_
SPK LEVEL
On the remote control:
Press ©/I AUDIO•
On the center unit:
Press ©/I.
When DVD or USB MEMORY is selected as the source (see page
17), the following messages will appear on the TV screen.
• "OPEN"/"CLOSE":
Appears when opening or closing the disc tray.
• "NOW READING"
Appears when the system is reading the disc/file information.
• "REGION CODE ERROR!":
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
• "NO DISC":
Appears when no disc is loaded.
• "NO USB DEVICE":
Appears when no USB mass storage class device is connected.
• "CANNOT PLAY THIS DISC":
Appears when unplayable disc is loaded.
• "CANNOT PLAY THIS DEVICE":
Appears when unplayable USB mass storage class device is
connected.
NOTE
• The STANDBY lamp on the center unit lights red when the power is
turned off_ The lamp goes offwhen the power is turned on.
• The power supply to the subwoofer is linked to the center unit. The
POWER ON lamp on the subwoofer lights green when the power is
turned on.
• A small amount of power is consumed even when the power is turned
off (center unit only). This is called standby mode and the STANDBY
lamp lights in this mode. Unplug the power cord from the AC outlet
to turn the power offcompletely.
• You can also turn on the system by pressing the following buttons;
One of the DISC (1-5) buttons (with SHIFT pressed) on the remote
control
One of the DISC (1-5) _A buttons on the center unit
One of the source selecting buttons or I_ (playbutton) on the
remote control
One of the DISC (1-5) I_ buttons or I_ on the center unit.
STANDBY lamp PHONES
DISC 1 -5 --A/_
16