Toyota 2007 CAMRY Manual page 442

[A] : System Title
[B] : Indicates the wiring color.
Wire colors are indicated by an alphabetical code.
B = Black W = White
L = Blue V = Violet
R = Red G = Green
P = Pink Y = Yellow
O = Orange
The first letter indicates the basic wire color and the
second letter indicates the color of the stripe.
Example: L – Y
L Y
(Blue) (Yellow)
[C] : The position of the parts is the same as shown in
the wiring diagram and wire routing.
[D] : Indicates the pin number of the connector.
The numbering system is different for female and
male connectors.
Example: Numbered in other Numbered in other
from upper left to from upper right to
lower right lower left
Female
The numbering system for the overall wiring diagram is
the same as above
[E] : Indicates a Relay Block. No shading is used and
only the Relay Block No. is shown to distinguish
it from the J/B.
Example: Indicates Relay Block No.1
BR = Brown
SB = Sky Blue
LG = Light Green
GR = Gray
Male
[F] : Junction Block (The number in the circle is the J/B No.
and the connector code is shown beside it).
Junction Blocks are shaded to clearly separate them
from other parts.
Example:
3C indicates that
it is inside
Junction Block
No.3
[G] : Indicates related system.
[H] : Indicates the wiring harness and wiring harness
connector. The wiring harness with male
terminal is shown with arrows (
Outside numerals are pin numbers.
Female
[I] : ( ) is used to indicate different wiring and
connector, etc. when the vehicle model, engine type,
or specification is different.
[J] : Indicates a shielded cable.
[K] : Indicates a ground point.
[L] : The same code occurring on the next page indicates
that the wire harness is continuous.
[M] : Indicates the ignition key position(s) when the power is
supplied to the fuse(s).
).
Male ( )