Independent Stairclimbers SC95, SC91, SC85, S9i, 95Si, 90S, and 95Se
WATTS DISPLAY ENABLE/DISABLE
If this option is enabled, the MESSAGE CENTER displays the Watts equivalent of the RPM. This message will only
be displayed after a level change.
The DOWN ARROW will turn OFF the WATTS DISPLAY.
The UP ARROW will turn ON the WATTS DISPLAY.
The ENTER key LED indicates when the value is at the default setting of WATTS DISPLAY ON.
The value is stored in EEPROM and is kept when the stepper is not in use.
Press the ENTER Key to advance to the next diagnostic state.
Press the CLEAR Key to return to the previous diagnostic state.
Exit the diagnostic state by pressing the CLEAR Key until the display reads SELECT WORKOUT.
21