User Instructions
Getting started
1. The first time you power on the CDVB5 when
connected correctly you will see the following
screen.
2. Use the
/
buttons to navigate up or down
and the
/
buttons to change the options.
3. When complete press the ENTER button.
You will be asked if you want to complete the
installation. Use the
and then press the ENTER button to finish the
installation.
4. A channel search will automatically begin and list
all the available stations.
If multiple transmitters are available select which
you wish to use from the pop up menu.
System power ON / OFF
1. To power the system ON or OFF press the
POWER button on the remote control.
Switching between Radio & TV
1. Pressing the TV/RADIO button switches
between the TV station list & the radio station
list.
Volume controls
You can change the volume of your CDVB5 by
using the VOL+ and VOL- buttons on the remote
control. VOL+ will increase the volume and VOL-
will decrease the volume. To turn the volume off,
press the MUTE button on the remote control. To
turn it back on, press the MUTE button again.
5
/
buttons to select YES
Using subtitles
To use subtitles, press the SUBTITLE button on the
remote control. When activated the screen below
will be shown.
Use the
button to enable subtitles and select from
the available languages using the
Press the ENTER button to activate.
NOTE: DON'T FORGET! Subtitles are only shown
when they are broadcast with the programme. Not
all programmes have subtitles.
Using digital text
Many digital channels also provide digital text.
For example this could be information about
programmes, the weather, news and many other
topics.
1. To use digital text, press the TEXT button on the
remote control. An example is shown below.
2. To exit digital text press the EXIT button.
/
buttons.