Table of Contents
Advertisement
User Instructions
Configuration
default is 6 seconds. Use the
through the options 1-6 seconds.
OSD Trans: Controls the translucency of the
interface. Use the
/
buttons to cycle through
the options 10% - 60%.
OSD Language, Audio Language & Subtitle
Language: Use the
/
language selection options. Then use the
buttons to select the language you require from
English, Gaelic or Welsh. Press the ENTER button
to store the setting.
TV Settings
Aspect Ratio: This setting controls how the picture
fits the screen depending on the TV used. Press
the
/
buttons to cycle through 16:9, 4:3LB (
letter box ) or 4:3PS ( Pan & Scan ).
Video Output: Press the
through the two options of RGB or CVBS
depending on what signal your TV requires.
Brightness: Use the
/
Brightness level options. Then use the
buttons to select from 0% to 100%. Press ENTER
to apply the brightness level setting.
Contrast: Use the
/
Contrast level options. Then use the
to select from 0% to 100%. Press ENTER to apply
the contrast level setting.
HUE: Use the
/
buttons to enter the Hue level
options. Then use the
-6 to +6. Press ENTER to apply the hue level.
11
/
buttons to cycle
buttons to enter the
/
/
buttons to cycle
buttons to enter the
/
buttons to enter the
/
buttons
/
buttons to select from
Configuration
Saturation: Use the
/
Saturation level options. Then use the
buttons to select from 0 to 12. Press ENTER to
apply the saturation level setting.
System Settings
EQ Setup: The sound can be altered with EQ
presets. Use the
/
buttons to cycle through the
options of: Standard, Classic, Rock, Jazz & Pop.
Surround: The surround setting adds a spatial EQ
effect to the sound to simulate an environment. Use
the
/
buttons to cycle through the options of:
Off, Concert, Church, Passive & Live.
LCN: Means Logical Channel Number and
denotes wether the stations are listed by channel
number IE: BBC, BBC2 etc or by station order.
Area: Set the country location. Use the
buttons to select.
Parental Rating: Restrictions based on age can
be set here by setting an age limit. Any programs
exceeding that age will require the pass code to
view.
When selected a 4 digit pass code is required to
proceed with the function. The default code is
'0000'. You can then use the
the age. Press ENTER to store the setting.
Auto Standby: The auto standby function shuts the
unit down into the standby mode when left unused
/
for 3 hours. Use the
OFF.
When set to ON you will see a pop up appear
after 3 hours asking if you'd like to stop the auto
standby process. Simply select NO and press the
ENTER button to remain viewing.
Channel Update: This function keeps channel
listings current if any alterations are made to the
transmission.
OAD Upgrade: Enabling this option allows
software updates to be applied over transmissions.
The Manual option stops any updates being applied
unless performed manually. Auto allows updates to
be applied when the unit is on or in standby mode.
buttons to enter the
/
/
/
buttons to select
buttons to select ON or
Hide quick links:
Advertisement
Table of Contents
