Delete All; Installation; Osd Settings - Alba Set Top Box CDVB5 Installation & User's Instructions

User Instructions
Digital TV
1. Select the DELETE ALL option from the Channel
manager menu.
2. A 4 digit pass code is required to proceed with
this function. The default code is '0000'.
3. Once the pass code has been entered you will
have a choice of "All TV Channels" or "All Radio
Channels". Press ENTER to make the selection.
and confirm by selecting YES and pressing
ENTER again.
4. Press the EXIT button once complete to return to
the Channel Manager screen.

Installation

There are two methods of installation as follows:
Auto search
When selected the AUTO SEARCH function starts
automatically. Any stations found will be added to
the channel list for radio & TV.
NOTE: If your location falls between transmitters,
then you will be requested to select one after the
scan is complete.
Manual search
The manual search function requires some
knowledge of digital TV or a specific channels
settings.
1. Set the CHANNEL NAME value to the Channel
number you wish to search.
Digital TV
2. Press the ENTER button and wait for the search
to commence. If the display returns back to the
Installation screen immediately then no stations
where found on that Channel number.
3. If stations are found on the Channel number
the channel list will be built until all are found.
Then the display will return to the Installation
screen.
The configuration menu allows you to alter the
default settings of the CDVB5.

OSD Settings

OSD: Use the / buttons to cycle through
various coloured versions of the graphic interface.
OSD Timeout: Sets the duration the On-Screen
display stays visible for when not in use. The
10