To Move Back The Playback Position During Dvd Video Playback [One Touch Replay Function]; To Change The Brightness Of The Display Window - JVC XV-N5SL Instructions Manual

Basic operations
The indication on the rightmost end of the status bar shows the unit's transport status as follows:
Icon Status
Playback mode.
Stop mode.
Pause mode.
Fast forward/backward playback mode.
Slow motion playback mode.
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access
various functions.
(Example of the menu bar for DVD VIDEO)
8.5Mbps
OFF CHAP.
See page 36 for details about the menu bar.
NOTE
• To dismiss the status bar:
Press ON SCREEN until the status bar is dismissed.
To move back the playback position during DVD VIDEO playback
[One touch replay function]
During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position.
¶ During DVD VIDEO playback
Press 3.
The playback position moves back 10 seconds before the current position.
Note that this function works only within the same title, though it works between chapters.
If you press 3 within 10 seconds from the beginning of a title, playback starts from the beginning of the title.
NOTES
• This function works only with DVD VIDEO discs.
• When appears on the TV screen:
This function may not work with some DVD VIDEO discs.

To change the brightness of the display window

You can dim the brightness of the display window.
Press 5 or ∞ while holding down ANGLE.
You can select the display window brightness from four levels, or off. If the brightness is set to off, nothing will be
shown on the display.
22
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
Available :