Page 1
Vito TT Vito instruction for safe use VOTT_0118_1011_V1...
Page 2
BELTED ISOFIX The “Vito” car seat is secured in vehicles with The "Vito" car safety seat is attached to the car using the ISOFIX system. See the “Isofix Base 0+1” a three-point seat belt. instruction manual for the vehicle installation...
Page 6
SEMI-UNIVERSAL CATEGORY 9-18 Kg Y ISOFIX...
Page 16
EN_English • The item is given a serial number. • If you have any difficulty fitting Vito in your car, lift up or remove the vehicle’s headrests. Thank you for choosing a Mamas & • If your car has storage compartments on the floor of the vehicle, in the area where the support leg is to rest, Papas product.
Page 17
Attachment in vehicles with safety belts attached to the base. 1• Place the Vito car seat on the vehicle’s seat, facing in the 13• Pull the handle on the base (Arrow A) and push the base normal direction of travel of the vehicle, as shown in the with the car seat against the vehicle’s seat until they can go...
Page 18
(fig. b). 18• The child is sitting correctly with the safety harness • To release the Vito car seat from the Isofix Base 0+1, press the fastened properly. same lever in the same way (See Point 10).
Page 19
Vito can be found under the seat. amendment (the one currently in force) of Regulation R44. 43• The approval label of the Vito is behind the backrest. • Reference standard: UN/ECE R44/04. 44• Production date of the strap.
Page 20
Declaration of conformity Product name VITO /mamasandpapasuk VITO ISOFIX Product reference number IMDA* IMDT* @mamasandpapas Reference Standards (origin) UNI ECE R44/04 (EU) Universal UNI ECE R44/04 Semiuniversal Class A (in combi- nazione con base Isofix 0+1 IAKISN00 – in com- bination with Isofix base 0+1 IAKISN00 – avec...