Page 2
Thank you for ordering from Mamas & Papas. For over 30 years, we have been committed to creating a world of quality, individuality and style for parents around the world. At the very beginning we were inspired by our daughters — now we see them all grown up, with children of their own, helping us to share our passion for parenting to their generation of Mums and Dads.
Page 3
INSTRUCTION MANUAL :DO NOT fit in a passenger seat of a vehicle WARNING that has an air bag fitted.(SRS) NOTICE 1.This is a “Universal” child restraint; it is approved to Regulation No.44,04 series of amendments, for general use in vehicles and it will fit most ,but not all, car seats.
Page 4
1. Features Backrest Shoulder pad strap Shoulder Pad Comfortable cushion Harness strap Buckle Buckle pad Harness adjuster cover Harness adjuster lever (Under the cover) Belt guide hook Recline handle Harness adjuster strap Belt guide hook Shoulder belt slots Shoulder pad yoke Harness yoke Belt guide slot Base...
Page 5
2. Safety warning Read these instructions carefully before fitting your car seat. Remember, an incorrect installation could be dangerous. The correct use and maintenance of your car seat will ensure it gives long and trouble free use. When somebody else is using your car seat, ensure they also know how to use it, especially the correct way to adjust and fit it.
Page 6
Car interiors can become very hot when standing in direct sunlight – it is therefore recommended that the car seat is covered by a towel when not in use. This prevents the car seat and its metal parts becoming hot and burning the child.
Page 7
3.2 Checking the harness strap height YES-Correct NO-Too low NO-Too high Always check that the harness shoulder straps are at the correct height for your child. The harness shoulder straps should always be threaded through the slots in the cover and seat shell that are closest to the top of your child’s shoulders.
Page 8
3.4 Adjusting the Harness Loosening the harness The harness is loosened by pressing the harness adjuster lever on the front of the seat. Press down the harness adjuster lever, at the same time grip the harness shoulder straps with your other hand, pull the shoulder straps towards you to loosen the harness.
Page 9
The child seat has a choice of 3 different recline positions: 1. Upright 2. Semi reclined 3. Fully reclined. To change the position of the child seat lift the recline handle and slide the seat into the preferred position - release the recline handle and move the seat until you hear a "click"...
Page 10
Step 3. Thread the harness shoulder straps back through the cover and the harness shoulder belt slots in the seat shell - ensure both harness shoulder straps are at the same height. Step 4. Feed the shoulder pad straps through the same slots ensuring the straps are under the harness shoulder straps and attach the shoulder pad straps to the shoulder pad yoke securely.
Page 11
Diagonal belt Lap belt Step 3. Thread the vehicle's Step 2. Place the child seat on the diagonal belt into the child vehicle seat rearward-facing and s e a t ' s b e l t g u i d e h o o k make sure that the front of the ( f u r t h e s t a w a y f r o m t h e child seat is firmly pressed against...
Page 12
4. 2 FORWARD FACING For use with group 1 - 9kg - 18kg Diagonal belt Lap belt Step 2. Thread the diagonal belt into Step 1. Place the child seat on the both belt guide hooks on the backrest vehicle’s seat forward-facing and of the child seat.
5. Maintenance and cleaning 5.1 Daily maintenance 1.To remove the cover and pillows for washing remove the harness shoulder straps (see 3.6 page 6) 2.Remove the shoulder pads by slipping off both shoulder pad straps from the shoulder pad yoke. 3.Remove the buckle and buckle pad (see 3.7 page 7) 4.The cover and pillows can now be removed for washing.
Need help?
Do you have a question about the Venture and is the answer not in the manual?
Questions and answers