Table of Contents
Advertisement
Getting started
04
Setting the channel
This DVD/VCR is equipped with a channel memory
feature that allows you to skip channels up or down to
the next channel set in memory, hence skip over
unwanted channels.
Before selecting channels, they must be programmed
into the DVD/VCR's memory. In addition to normal VHF
and UHF channels, this DVD/ VCR can receive up to 113
Cable TV channels. To use this DVD/VCR with an
antenna, set the TV/CABLE menu option to the TV mode.
When shipped from the factory, this menu option is in
the CABLE mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "CH SETUP". For the procedure, see steps 1
to 3 in "Using the SETUP MENU" on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
TV/CABLE SELECT
AV SETUP
AUTO CH MEMORY
REC SETUP
ADD/DELETE
GUIDE CH SET
CH SETUP
OTHER
SELECT
ENTER
ENTER
TV/CABLE SELECT
Select "TV/CABLE SELECT" and select "TV" or "CABLE".
TV:
VHF/UHF channels
CABLE: CABLE TV channels
AUTO CH MEMORY
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
When you select "AUTO CH MEMORY" and press
ENTER.
The AUTO CH MEMORY function will be activated.
The channel display will count up and, when finished,
the screen returns to normal.
32
En
2G00201B_En_22_32
CH SETUP
CABLE
PROCEED
PROCEED
PROCEED
RETURN
BACK
SETUP
END
32
ADD/DELETE (channels)
You can add the channels you want or delete the
channels you do not want manually.
Select "ADD/DELETE" and select "ADD" or "DEL." for
each channel.
• Press
or
to select the channel.
The numeric keys can also be used for selection.
• When you want to delete the selected channel,
press
to select "DEL" and press ENTER.
• When you want to use the selected channel, press
to select "ADD" and press ENTER.
Setting other items
You can set the switching interval between played back
images in the slide show mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "OTHER". For the procedure, see steps 1 to 3
in "Using the SETUP MENU" on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
JPEG INTERVAL
AV SETUP
REC SETUP
CH SETUP
OTHER
ENTER
ENTER
RETURN
BACK
JPEG INTERVAL
You can select the interval time for JPEG slide show
(page 46).
Select "JPEG INTERVAL" and select the switching
interval between images from the list below.
OFF:
The slide show mode is not used.
5 SEC:
The interval is set to 5 seconds.
10 SEC:
The interval is set to 10 seconds.
15 SEC:
The interval is set to 15 seconds.
8/4/05, 10:54
OTHER
OFF
SETUP
END
Hide quick links:
Advertisement
Table of Contents
