Compaq MV7540 Service Manual page 10

SH
AB
9300 COLOR TEMPERATURE
6500 COLOR TEMPERATURE
5500 COLOR TEMPERATURE
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the optimum
picture.(H/V-size:312*234mm)
E. Select the "
returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, ROTATION, COLOR TEMPERATURE are
common mode saved in the memory. Don't needed adjust it individual at every timing Mode and save in
the memory.
3. White Balance, Luminance adjustment:
A. Bias (Raster) adjustment:
(a) Set mode8
(b) To make the adjustment condition is under the Factory preset OSD menu.
Same as step 2-B.
(c) Warm up more than 20 minutes.
H-SIZE
H-CENTER
V-SIZE
V-CENTER
PINCUSHION
PARALLELOGRAM
PIN-BALANCE
TRAPEZOID
ROTATION
NO USE
ABL ADJUST
CONTRAST
BRIGHTNESS
R-BIAS
G-BIAS
R-BIAS
R-GAIN
G-GAIN
B-GAIN
" RETURN function and press the MENU Key, then the Factor Preset window will be
1024×768 @85Hz full white pattern(100% white field).
H-MOIRE REDUCE
V-MOIRE REDUCE
MOIRE DISABLE
HE
NO USE
VE
NO USE
NO USE
V-LINEARITY
V-LINEARITY
TOP CORNER
BOT CORNER
FREQUENCY SELECT
HM
MAX-HSIZE MODIFY
VM
MAX-VSIZE MODIFY
KM
MAX-TRAPEZOID MODIFY
BI
BI SELECT FUNCTION
DEGAUSS
OSD EXIT
RETURN
Tm
BURN IN TIME
USER OSD HORIZONTAL
LOCATION ADJUST
USER OSD VERTICAL
LOCATION ADJUST
FACTORY OSD VERTICAL
FV
LOCATION ADJUST
10
HP MV7540