Sanyo PLC-XU55 Quick Start Manual page 3

Step Five: Zoom and focus
First set the zoom using the zoom
lever as indicated in the drawing, then
focus the image using the focus ring.
How to connect a video source to the projector
Step One: Determine connector type and connect
The projector easily accepts S-Video and Composite Video inputs (a composite video cable is
included with the projector). See the figure on the first page of this guide for connections.
Step Two: Set the Input source
Turn on both units. Use the input button and arrow keys on top of the projector (see previous
diagram) to toggle to the appropriate video input.
Step Three: Zoom and focus
First set the zoom using the zoom lever as indicated in the drawing, then focus the image
using the focus ring (see figure above).