Table of Contents
Advertisement
During a call:
Press <UP> or <DOWN> to increase or decrease the volume level respectively.
The current setting is shown.
When you end the call, the volume settings w ill still remain at the last selected level.
4.6 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
P ress <M ute/Left S oft key> to m ute the m icrophone. Y our caller cannot hear you.
P ress <U nm ute/Left soft key>
again to unmute the microphone.
4.7 Set the Silent Mode
In idle, press and hold <#> to turn off the ringer. The "RINGER OFF" icon is displayed on the LCD.
4.8 Redial
You can redial up to
stored a name in the phonebook to go with the number, the name will be displayed instead.
4.8.1
Redial a number from the redial list
1. Press <DOWN> to access the redial list.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
4.8.2
Save a redial number into the phonebook
1. Follow steps 1 and 2 in section 4.8.1
2. Press <Select> to select the redial number.
3. Press <Menu> and <UP/DOWN> to select Add to PB.
4. Press <Select> to enter the name, edit the number if necessary and select the melody.
Note: Press <DOWN> to go to next field to enter the number
and press <DOWN> to select the melody by pressing
<RIGHT> or <LEFT>. Name and number should be entered in order to save a new phonebook entry.
5. Press <OK> to save the redial number into the phonebook.
4.8.3
Delete a redial number
1. Follow steps 1 to 3 in section 4.8.2
2. Press <Menu> and <UP/DOWN> to select Delete
3. Press <OK> to confirm.
4.8.4
Delete the entire redial list
1. Follow steps 1 to 3 in section 4.8.2
2. Press <Menu> and <UP/DOWN> to select Delete All
3. Press <OK> to confirm.
4.9 Keypad Lock
You can lock the keypad so that it cannot be used accidentally while carrying it around.
1. To lock the keypad: In idle mode, press and
hold <*> key, the <Keypad lock icon>will display.
2. To unlock the keypad: In idle mode, press and hold <*> key, the <keypad lock icon> will disappear.
4.10 Find Handset
You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will
ring up for 30 seconds and "Paging " is displayed on the LCD.
You can stop the paging by pressing any key on the
handset except <Silent / Right soft key> or pressing <PAGE> on the base to stop paging.
8
20 of the last numbers called. If you have
.
.
.
"
.
.
List Empty"
.
Advertisement
Table of Contents
