Viewing Individual Images In A Group - Canon PowerShot SX520 HS User Manual

Viewing Individual Images in a Group

] or [ ] mode ( = 49, = 56) are grouped for
Images shot in [
display, and these grouped images can be viewed one at a time.
1
Choose a grouped image.
●
Press the [ ][ ] buttons to choose an
image labeled with [
2
Choose [
● Press the [ ] button, and then choose
] in the menu ( = 26).
[
3 View images in the group
individually.
●
Pressing the [ ][ ] buttons will display
only images in the group.
●
To cancel group playback, press the [ ]
button, choose [
press the [ ] button again ( = 26).
Still Images Movies
].
].
] in the menu, and
●
During group playback (step 3), you can use the menu functions
accessed by pressing the [ ] button. You can also browse
through images quickly "Navigating through Images in an Index"
( = 77) and magnify them "Magnifying Images" ( = 80). By
choosing [Protect All Images in Search] in "Protecting Images"
( = 82) or [All Images in Group] in "Erasing Multiple Images
at Once" ( = 85), "Adding Images to the Print List (DPOF)"
( = 114), or "Adding Images to a Photobook" ( = 116), all
images in the group can be manipulated at once.
●
To ungroup images so that they are displayed only as single still
images, choose MENU ( = 27) > [
] tab > [Group Images] >
[Off] ( = 27). However, grouped images cannot be ungrouped
during individual playback.
● In [ ] mode, the simultaneous display after step 2 in "Enjoying
a Variety of Images from Each Shot (Creative Shot)" ( = 49) is
only shown immediately after you shoot.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
Auto Mode /
2
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
6
Playback Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
79